frame-relay

[himanshu]

ON ROUTER 1-->

Router(config)#
Router(config)#int fa0/0
Router(config-if)#ip add
Router(config-if)#ip address 10.1.1.1 255.0.0.0 (ip address of its ethernet port))
Router(config-if)#no shut
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#
Router(config)#int s0/0
Router(config-if)#ip add
Router(config-if)#ip address 150.1.1.1 255.255.0.0 (provide an ip to its serial port)
Router(config-if)#no shut
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0, changed state to down
Router(config-if)#clock rate 64000
Router(config-if)#exit
Router(config)#
Router(config)#
Router(config)#int s0/0
Router(config-if)#en
Router(config-if)#encapsulation frame-relay
Router(config-if)#frame-relay lmi-type cisco
Router(config-if)#frame-relay interface-dlci 100 (your DLCI no.->100)
Router(config-if)#frame-relay map ip 150.1.1.2 100 (destination serial ip->150.1.1.2)
Router(config-if)#exit

ON ROUTER 2-->

Router(config)#
Router(config)#int fa0/0
Router(config-if)#ip add
Router(config-if)#ip address 11.1.1.1 255.0.0.0 (ip address of its Ethernet port)
Router(config-if)#no shut
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#
Router(config)#int s0/0
Router(config-if)#ip add
Router(config-if)#ip address 150.1.1.2 255.255.0.0 (provide an ip to its serial port)
Router(config-if)#no shut
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0, changed state to down
Router(config-if)#clock rate 64000
Router(config-if)#exit
Router(config)#
Router(config)#
Router(config)#int s0/0
Router(config-if)#en
Router(config-if)#encapsulation frame-relay
Router(config-if)#frame-relay lmi-type cisco
Router(config-if)#frame-relay interface-dlci 200 (router 2 dlci no->200)
Router(config-if)#frame-relay map ip 150.1.1.1 200 (destination serial ip->150.1.1.1)
Router(config-if)#exit


NOW,WE HAVE TO DO ROUTING ON BOTH THE ROUTER..

->We are using static routing here,

ON ROUTER R1-->
Router(config)#ip route 11.0.0.0 255.0.0.0 150.1.1.2 (150.1.1.2 Is the ip address of 2nd router)


ON ROUTER R2-->
Router(config)#ip route 10.0.0.0 255.0.0.0 150.1.1.1 (150.1.1. Is the serial ip address of 1st router)